LaserRobot Series Non-Metal 3D Laser Cutting Robot
Short Description:
LaserRobot non-metal 3D laser cutting robot is a CO2 laser solution which is applicable to 3D non-metal material cutting. Precise 6-axle robot matches CO2 laser articulated arm perfectly by building the articulated arm into the robot arm which helps reduce the movement interference. CO2 laser cutting head with different focus lengths could be chosen in accordance with various workmanships. The anti-collision module is fixed to output alarm signal when the collision is about to happen to effec...
Product Detail
Features
Specifications
Product Tags
LaserRobot non-metal 3D laser cutting robot is a CO2 laser solution which is applicable to 3D non-metal material cutting. Precise 6-axle robot matches CO2 laser articulated arm perfectly by building the articulated arm into the robot arm which helps reduce the movement interference. CO2 laser cutting head with different focus lengths could be chosen in accordance with various workmanships. The anti-collision module is fixed to output alarm signal when the collision is about to happen to effectively protect laser cutting head and robot.
• High precision 6-axle robot, flying ray with high precision processing rectified by professional optics device.
• More efficient laser cutting workmanship, high quality cutting section, no burrs and adhering slag.
• Fully integration of CO2 laser and robot especially applicable to complicated 3D laser processing.
• Compact overall structure and simple installation & commissioning.
• Based on EtherCAT bus protocol which comes with touch screen & PLC, serial interface which gives the strong universality and applicability.
CO2 laser source | |
Output power |
250W / 120W / 60W |
Wavelength |
10.6μm |
Beam quality (M2) |
≤1.2 |
Laser cutting head | |
Focus adjustment range |
10mm(-3~+7) |
Assist gas pressure |
≤10bar |
Focus length |
75mm; 125mm; 150mm; 200mm. |
Robot | |
Model |
FANUC M-20iA |
Working radius |
1811mm |
Repositioning accuracy |
±0.08mm |
Mounting way |
Floor, ceiling and tilt angle mounting |
Chiller | |
Rated capacity |
3500W |
Water tank volume |
24L |
Chilled water flow |
7.5~11L/min |
Chilled water pressure |
≤4Bar |
Control cabinet | |
Rated voltage |
220V |
Rated power |
10KW |
Short-circuit current |
63A |
*Specifications are subject to change without notice